home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload Trio 2 / Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO / dir34 / dos999.zip / 2303.TXT < prev    next >
Text File  |  1993-04-08  |  4KB  |  99 lines

  1. ___________________________________________________________________________
  2. STACKER NOTE                                                   STACKER NOTE
  3. Title: Installing the IBM Corrective Service Diskettes on a  
  4.        "Stacked" hardisk.   
  5. STAC FAX Index #2303 - 3/26/92                          
  6. ___________________________________________________________________________
  7.  
  8. Background.
  9.  
  10.     The key to installing these new programs is to NOT boot up from the IBM 
  11.     Corrective Service Diskettes (as the instructions indicate), but instead 
  12.     to simply boot normally, thereby having the Stacker drives mounted and 
  13.     available.
  14.  
  15. Procedure.
  16.  
  17. 1.  Begin the process by inserting the first IBM Corrective Service Diskette 
  18.     (CSD), into the A: diskette drive (this procedure will not work from the 
  19.     B: drive or any other external floppy drive). If you can only install 
  20.     from your B: drive (due to broken A:, etc), you can use the ASSIGN command 
  21.     to switch the drive letter specifications.
  22.  
  23. 2.  Run the 'AUTOEXEC' file. It contains the command 'UPDATE x' where 'x' 
  24.     represents the number of Corrective Service Diskettes to be run from 
  25.     the update package (UPDATE.COM is an IBM program on the first CSD).
  26.  
  27. 3.  The README file will automatically be displayed. Continue to press any 
  28.     key until the end of the README file is reached.
  29.  
  30. 4.  At the prompt:
  31.       
  32.     Enter your keyboard code:(press 'Enter' to accept the default of 'US').
  33.  
  34. 5.  At the prompt:
  35.  
  36.     Enter the drive which contains DOS 5.0 files to be replaced: ( enter 
  37.     the drive letter which contains the directory or directories you wish 
  38.     to update and press 'Enter').
  39.  
  40. 6.  The next information displayed will indicate whether the target drive is 
  41.     or is not 'IBM DOS version 5.0'. This indicates the presence of the
  42.     DOS system files in the root directory of the drive.
  43.  
  44.     If the following prompt appears:
  45.  
  46.     "Target is IBM DOS version 5.0. Do you want to replace the DOS files in 
  47.      all directories (Y/N)?"
  48.  
  49.     Then press 'Enter' to accept the default of 'Y'.
  50.  
  51. 7.  If the following prompt appears:
  52.  
  53.     "Target is NOT IBM DOS version 5.0 Be sure to specify your IBM DOS 
  54.      5.0 subdirectory. Enter the target directory name (\path):"
  55.  
  56.     Then enter the name of the DOS directory (including the '\').
  57.  
  58.     The system will begin the automated process by first 'SYS'ing the drive 
  59.     if the IBM system files were previously detected. It will then continue 
  60.     by replacing the appropriate IBM DOS 5.0 files it can find in the root 
  61.     directory and subdirectories.
  62.  
  63. 8.  The user will then be instructed to:
  64.  
  65.     "Insert next IBM DOS Corrective Service Diskette into drive A: 
  66.      Press any key to continue..."
  67.  
  68.     This sequence will be repeated until all the Corrective Service Diskettes 
  69.     have been processed and the various update programs copied to the 
  70.     respective directories.
  71.  
  72. 9.  When the procedure is finished, the user will be prompted either to:
  73.  
  74.     "Remove IBM DOS Corrective Service Diskette from drive A: 
  75.      Press any key to restart system..."
  76.  
  77.      or to choose:
  78.  
  79.      "Another target directory name (Y/N)?" if updating a 'NON IBM DOS' drive.
  80.  
  81. 10. If there are more drives or directories to update, the user then restarts 
  82.     the procedure by changing to the diskette drive and re-running 'UPDATE x' 
  83.     again, this time choosing a different drive letter or directory to update.
  84.     If you are "swapping" the C: drive with Stacker, then you will want to 
  85.     to update the uncompressed/host drive as well.  To see which drive is
  86.     swapping with C:, run SWAPMAP.
  87.  
  88.  
  89.     There have been sporadic problems reported with the UPDATE program 
  90.     hanging the system when pressing 'Enter' after entering the drive letter 
  91.     to update. In every instance, the solution has been to remove the 
  92.     diskette, reboot the system and restart the procedure once again. 
  93.     The second time, everything goes OK. This problem is not destructive. 
  94.  
  95. ___________________________________________________________________________
  96. Copyright 1993, Stac Electronics                    
  97.  
  98.                                 
  99.